Pages

Friday, 5 May 2017

First Holy Communion card - Mia

Mia, our little Grand daughter over in Germany, has just recently taken her first Holy Communion and I made her this card:
I used:

- 5" x 7" white card blank

- a layer of very slightly smaller silver mirri card, glued to the card front

- a piece of white card stock, embossed using a Couture Creations 'Constellations' folder then trimmed down to a smidgen smaller than the silver layer and glued in place

- the cross itself was actually made first a couple of days before I made up the card - used white card stock, backed with Stick-It sheet and two Tonic dies from the Tonic Studios 'New Life Cross' set to die cut the filigree shape with a solid outline

- then I used just the solid die from the same set to cut a silver mirri cross

- layered the white filigree onto the silver and then ran it through the Cuttlebug to make sure the Stick-It was thoroughly in contact. A surprise side effect was that it also produced a lovely effect effect of almost embossing the filigree into the silver layer

- then cut a further two solid crosses and added them to the back of the double layer front, just to made the whole thing more 'solid' and robust

- the sentiment was stamped using a VersaMark pad, sentiment from 'Stamping All Day' and then heat embossed using Stampendous 'Sterling Silver' EP

- to die cut the sentiment I ended up using a die from the DoCrafts 'Speech Bubbles' set, making a template first to ensure the die sat properly over the sentiment before I die cut it

- also die cut a further two layers as I did for the cross to thicken up the sentiment

- ran a silver Calligraphy pen around the edge of the sentiment label just to add a bit of a finish

- used thin sticky pads to adhere the cross and the sentiment to the card front

I thought I had a 'dud' die as the centre wasn't cutting properly - but when I switched to 200gsm rather than 250gsm card it worked perfectly! That's made me wonder about some other intricate dies I had big problems with in the past, now I think about it - it was always when I was cutting using a particular white 250gsm card! I know that SU card is always trouble free and that's slightly lighter weight/thinner as well - I think a big penny just dropped here, oopsie!! It does only apply to quite intricate dies though, bigger outline dies do cut just fine using 250gsm.

The original intention was to add a few pearls to parts of the card and/or the cross but decided to call a halt rather than 'over egg the pudding'. Mia's name was on the printed insert I added, rather than the card front - again, to retain a more classic feel to the card.

Gosh it's taken me a good while to have the 'savvy' to run die cuts through the Cuttlebug again once they're fixed in place. The difference it makes is vast!





17 comments:

  1. Tis beautiful Miss Di. Very elegant and classic. Hugs Mrs A.
    p.s. I made the mistake of telling the doc you had a caddy too and his remark was 'I could bolt them together'. I told him to not even go there!! I spotted spectacle cleaner in his caddy today making it a total of 15.

    ReplyDelete
  2. What a fabulous card to celebrate Mia's first communion Di and this will be a keeper I'm sure. I love the filigree cross backed with the silver mirri card and the extra layers give it wonderful dimension, and the embossing in the background is really pretty, also the extra layers you have given the sentiment plate give it more substance too. x

    ReplyDelete
  3. Such an elegant card Di, great idea re the embossing, it looks really good

    ReplyDelete
  4. I'm sure Mia will treasure this lovely card. I imagine it would be difficult to buy a suitable card for the occasion.

    ReplyDelete
  5. Oh yes, that's a VERY elegant card for Mia. A lovely thing to treasure.

    I really MUST remember that top tip about running stuff back through the die cutting machine! It's a good'un.

    Hugs, Sarn xxx

    ReplyDelete
  6. I'm a big over egger (is that a word?) but I think you were quite right to stop. It's classic, it's elegant and its perfect! xx

    ReplyDelete
  7. How classy and elegant card for your Grand Daughter's Communion! Wow!! Great idea making a gold base for the cross and fab choice of ef!!
    I too have problems with intricate dies and heavvy cardstock...!

    ReplyDelete
  8. Beautiful card. I love the mirror paper. The cross is very lovely. How please she'll be to open this up.

    ReplyDelete
  9. Beautiful card Di - very elegant. Glad you didn't over egg it! I'm sure she loved it!

    ReplyDelete
  10. It's absolutely beautiful! Mia will love it especially with her name inside! Thank you for the die cutting tips too! Hugs xxx

    ReplyDelete
  11. Absolutely gorgeous, I hadn't seen that cross die before, but it's so pretty. I might *need* it now! Cara x

    ReplyDelete
  12. Absolutely beautiful card! I will keep your idea in mind regarding the weight of the paper and dies.

    ReplyDelete
  13. Stunning card, Di, I'm sure Mia was thrilled to receive it. Thanks for the tip about running the die cut through the die cutting machine again - I'm having a 'why didn't I think of that' moment. xx

    ReplyDelete
  14. Gorgeous! This is the nicest Holy Communion card I have seen! That is a beautiful and intricate cross. It is so perfect here.

    ReplyDelete

Thank you so much if you take the time to comment!

This is a public blog. Those leaving a comment on any post on this blog or entering a piece of artwork into a linky do so in the knowledge that their name and blog link are visible to all who visit this blog and in so doing have published their own personal details and consented to my use of that personal information should they be selected as a winner or to accredit work.